About 2x4" Rosin Pre Press Mold, Why Is the inside of the Mold Not 2x4"?

About 2x4" Rosin Pre Press Mold, Why Is the inside of the Mold Not 2x4"?

This is one of the most asked questions by rosineer, we named this mold 2x4 just to declare that it pairs with 2x4 rosin filter bags. In order to reduce your confusion, we specifically mention the size of puck in the description.

Now Let Us Talk about It in Details as Below;

Usually we need to use the mold to form pucks. Please understand that the compressed puck which you put into the filter bags is a three-dimensional block, it has length,width, height. The filter bag just has length and width. The puck size must be smaller than the filter bags, and then you are able to insert the puck into the bags. Moreover, extract the little smaller puck, it will prevent the filter bags from blowing out.

How to Avoid the Filter Bags from Blowing out? 

1. Remove excess stems from flowers.
2. Use less material in your filter bag.
3. Preheating your material first to get it melty before you begin to apply pressure.
4. Apply the pressure more slowly.

Best regards,

Dabpress Team